The moment you discover mold in any part of your house let it be
the basement, attic or on the wall of your bedrooms or lounge, it is really
important not to delay and take care of that immediately. Although the DIY
methods are there to take care of small spots of mold the large mold should be
dealt with seriousness and with a Mold
Inspection company in Delray Beach. The matter is not light as serious
health risks are involved when it comes to mold.
Mold inspection lets you know that what type of mold is present
also what type of cost will be spent on the repairs and therefore it should be
done by a qualified person who is skilled and professional by all means. As
there are mold inspection services out there that provide the service but
charge way more than what it should be. You should go for Professional Mold
Testing service that provides the best work and is affordable.
 |
Mold Inspection Delray Beach
|
So, what is a mold inspection?
A mold testing identifies conditions around your house that support
mold growth as well as finding problem areas of water damage, odors and signs
of mold growth. The mold inspector takes the inspection outside and checks the
outside of the area for signs of water damage, leaks, and broken pipes, broken
gutters, cracked brickwork.
What is actually done in a mold inspection?
After the inspector has arrived and had a good look at your place
the first job is normally Mold Detection that is to gauge humidity present in
the walls of the house. It is measured at gaps of about 2ft and areas under
sinks, around water heaters, anywhere that there is a water source present are
given special attention. Moisture is measured using a special meter which has
two small pins that are inserted into the lower part of the wall and will give
a reading to show the level of moisture present. The acceptable level is 15% or
below.
So if during the inspection the reading of the meters is above the
limit it means that there is mold growth also there is a sign of water damage.
Even if there are slight symptoms the inspector will still be bringing it to
your attention.
 |
| Mold Testing |
What is Sampling?
Two kinds of samples are collected from your property during the inspection.
one is air sampling and the other is material sampling. Air Sample collection
lets you know what type of mold is present in the atmosphere and in what
amount. Material sampling is performed where there is visible mold growth to be
discovered, however this will not decide whether or not these mold spores are
in the air. For more perfect results make sure that you keep your house all
closed for at least 24 hours before inspection. This will result in more
accurate results.
When to expect results?
These samples take 4-5 days to process at the laboratory and as
soon as the results come up you inspector will contact you immediately to let
you know the severity of the condition.
One important thing to consider is that a good mold inspector will never
just send a copy of the lab report instead will contact you to interpret the
results.
